InputTestHub

Stuck Pixel Fixer

Flashes rapid colour changes over a stuck pixel to try to free it. Works on stuck pixels only, never on dead ones.

Screen Tests Nothing uploaded No sign-up Free, unlimited
Screen Tests tool
10
The test starts automatically — follow the prompts above.
In short Flashing rapid colour changes over a stuck pixel can sometimes free it, by driving the latched sub-pixel through its full range until it starts responding again. It works on stuck pixels only — the ones showing a constant bright colour — and never on dead ones, because a dead pixel receives no power and nothing displayed on screen can change that. Ten to thirty minutes is the usual advice, and the honest version is that if an hour makes no difference, more time will not either. Two warnings. Do not press on the screen, despite how widely that advice circulates: it risks permanent damage to the layers under the glass, and any improvement people report is usually the panel flexing rather than a pixel recovering. And on OLED, keep sessions short — a few minutes at moderate brightness mirrors what a television's own pixel refresh does, while hours at maximum brightness ages the emitters unnecessarily. Success rates are modest. This is worth trying before a warranty claim, not instead of one.

How to use the Stuck Pixel Fixer

  1. The test starts on its own — no button to press and nothing to install.
  2. Follow the prompt in the test panel and watch the readings update live.
  3. Press Reset to start over with a clean slate.

About the Stuck Pixel Fixer

The Stuck Pixel Fixer flashes rapid colour changes over a stuck pixel to try to free it. Works on stuck pixels only, never on dead ones. It runs as plain JavaScript inside the page, which means there is no upload step, no queue and no size limit imposed by a server — the only limit is your own device.

What people use it for

  • Trying to recover a sub-pixel latched on in one colour.
  • Running the same routine a television's built-in pixel refresh uses.
Photosensitive epilepsy warning: this flashes rapidly. If you are sensitive to flashing images, set the speed to its lowest value or do not run this tool.

Explained in our guides

All guides

Frequently asked questions

How long should I run it?
Ten to thirty minutes is the usual advice. If an hour makes no difference, more time will not help either.
Does it work on dead pixels?
No. A dead pixel gets no power at all, and nothing displayed on screen can change that.
Should I press on the screen as well?
No. That advice circulates widely and risks permanent damage to the layers under the glass. Any improvement people report is usually the panel flexing rather than the pixel recovering.
Is this safe for OLED?
Short sessions are fine and mirror what a television's own pixel refresh does. Do not leave it running for hours at high brightness — that ages the emitters unnecessarily.
Is the Stuck Pixel Fixer free?
It is free, with no account, no trial and no daily cap. Every screen tests tool on inputtesthub.com works the same way: open the page and use it.
Is the Stuck Pixel Fixer safe to use with private information?
No. The Stuck Pixel Fixer runs entirely in your browser using JavaScript. Nothing is transmitted, logged or stored, which you can verify yourself in the Network tab of your browser's developer tools.
What do people use the Stuck Pixel Fixer for most?
The most common reasons people reach for it: trying to recover a sub-pixel latched on in one colour. Running the same routine a television's built-in pixel refresh uses. It is built for exactly those cases rather than being a general-purpose tool with this bolted on.
Any caveats I should know about?
Photosensitive epilepsy warning: this flashes rapidly. If you are sensitive to flashing images, set the speed to its lowest value or do not run this tool.
Do I need to install anything to run this test?
No installation, no extension and no driver. The Stuck Pixel Fixer uses the browser's own device APIs and begins as soon as the page loads, so there is nothing to press first. Press Reset at any point to start over with a clean slate.

Related screen tests tools

All 38
01

White Screen

Fills your entire screen with solid white. Cleaning the screen, spotting dust and dark…

02

Black Screen

Fills your entire screen with solid black. Finding stuck pixels, backlight bleed and IPS glow…

03

Red Screen

Fills your entire screen with solid red. Checking the red sub-pixels across the panel and…

04

Green Screen

Fills your entire screen with solid green. Checking green sub-pixels — the channel the eye is…

05

Blue Screen

Fills your entire screen with solid blue. Checking blue sub-pixels and spotting the colour…

06

Cyan Screen

Fills your entire screen with solid cyan. Testing green and blue together, which often exposes…

07

Magenta Screen

Fills your entire screen with solid magenta. Testing red and blue together and checking for…

08

Yellow Screen

Fills your entire screen with solid yellow. Testing red and green together — the brightest…

09

Grey Screen

Fills your entire screen with solid grey. The best single colour for judging panel uniformity…

10

Orange Screen

Fills your entire screen with solid orange. A warm mid-tone that shows tint shifts across the…