Speaker Test
Plays test tones through the left, right and both channels so you can confirm every speaker is…
Tone generators, frequency sweeps, channel checks and a live microphone meter, all built on the Web Audio API. Use them to confirm a speaker is wired correctly, find out how low your subwoofer really goes, or check that a headset microphone is picking you up before a call.
Plays test tones through the left, right and both channels so you can confirm every speaker is…
Plays a tone in one channel at a time, with a panel that lights up on the matching side so you…
Checks both headphone drivers with separate left and right tones, and confirms the stereo…
Confirms that stereo separation is working by playing distinct tones in each channel and then…
Alternates between channels so you can hear whether one side is quieter, and adjust the…
Generates a pure tone at any frequency from 1 Hz to 22 kHz, with a choice of waveform, channel…
Sweeps from 20 Hz up to 200 Hz so you can hear exactly how low your speakers or headphones…
A slow sweep from 10 Hz to 120 Hz for checking how deep a subwoofer really goes and where it…
Sweeps from 2 kHz to 20 kHz to check tweeter performance and find where high-frequency…
Glides smoothly across the whole audible range so you can hear dips, peaks and rattles in a…
Plays a steady tone at an exact frequency you choose — useful for calibration, tuning and…
Check your microphone with a short recording and playback. View the waveform and find help for…
Checks a headset microphone with a live level meter, waveform and a short recording, and shows…
Plays a click through your speakers, listens for it with your microphone, and reports the…
Plays tones from 8 kHz to 20 kHz so you can find the highest frequency you can still hear on…
Tap along to any track to find its tempo, with a rolling average and a reading of how steady…
Shows what your microphone hears as a live frequency spectrum on a logarithmic scale, with the…
Listens through your microphone and shows the note being played, its frequency, and how many…
Tone generators, frequency sweeps, channel checks and a live microphone meter, all built on the Web Audio API. Use them to confirm a speaker is wired correctly, find out how low your subwoofer really goes, or check that a headset microphone is picking you up before a call.
All 18 tools here are free and open immediately — there is no registration step, no credit card and no daily allowance to run out of. Most of them do their work in your browser, which means the page keeps working on a slow connection and your input is never sent to a server.