InputTestHub

Uric Acid — mg/dL to µmol/L

Converts uric acid from mg/dL to µmol/L, the factor taken from its molar mass. One mg/dL is 59.4845 µmol/L.

Converters Nothing uploaded No sign-up Free, unlimited
Converters tool
Enter a value to convert.
In short To convert uric acid from mg/dL to µmol/L, multiply by 59.4845 — so one mg/dL is 59.4845 µmol/L, and one µmol/L is 0.0168111 mg/dL. 6.0 mg/dL is 357 µmol/L; 6.8 mg/dL is 404 µmol/L; 7.0 mg/dL is 416 µmol/L. The factor comes from the molar mass, because uric acid has a molar mass of 168.11 g/mol; that is why it differs for every analyte and why a single "lab unit converter" factor does not exist. Uric acid is followed over time far more than most results — anyone managing gout is comparing this month's number with last year's — and the two unit systems make that comparison impossible without converting. 6.8 mg/dL and 404 µmol/L are the same figure, and it is the number most often quoted as the saturation point of urate in serum. This converts units. It does not interpret results, does not compare your value against a reference interval, and is not a substitute for the clinician who ordered the test — reference intervals differ between laboratories, methods and populations.

How to use the Uric Acid — mg/dL to µmol/L

  1. Type the value you want to convert.
  2. Pick the unit you are converting from and the unit you want.
  3. The converted value and the exact conversion factor are shown instantly.

About the Uric Acid — mg/dL to µmol/L

Uric acid is followed over time far more than most results — anyone managing gout is comparing this month's number with last year's — and the two unit systems make that comparison impossible without converting. 6.8 mg/dL and 404 µmol/L are the same figure, and it is the number most often quoted as the saturation point of urate in serum.

What people use it for

  • Reading a uric acid result issued in mg/dL when you are used to µmol/L.
  • Comparing an old report with a new one after moving country or changing laboratory.
  • Following a study or a guideline written in the other unit system.

Details

This conversion1 mg/dL = 59.4845 µmol/L
Conventional unitmg/dL — mg/dL in the US and much of Asia; µmol/L in the UK, Canada, Australia and Europe.
Factor1 mg/dL = 59.4845 µmol/L (divide by 0.0168111 to go back)
Where it comes fromMolar mass: uric acid has a molar mass of 168.11 g/mol
Worked examples6.0 mg/dL is 357 µmol/L; 6.8 mg/dL is 404 µmol/L; 7.0 mg/dL is 416 µmol/L
PrivacyThe arithmetic runs in your browser. Nothing you type is sent anywhere or stored.
The factor is printed on the page so the arithmetic can be checked rather than trusted. This converts units. It does not interpret results, does not compare your value against a reference interval, and is not a substitute for the clinician who ordered the test — reference intervals differ between laboratories, methods and populations.

Where this tool stops

This converts units. It does not interpret results, does not compare your value against a reference interval, and is not a substitute for the clinician who ordered the test — reference intervals differ between laboratories, methods and populations.

Frequently asked questions

Why is uric acid in µmol/L and glucose in mmol/L?
Because SI units are chosen so the numbers are convenient. There is roughly a thousand times less uric acid in blood than glucose, so reporting it in mmol/L would give values like 0.404. Shifting to µmol/L makes it 404. It is the same choice that puts a room in metres and a hair in micrometres.
What is the exact factor?
One mg/dL is 59.4845 µmol/L, and the reverse is 0.0168111. It is derived rather than looked up: uric acid has a molar mass of 168.11 g/mol, and the conversion follows from that.
Does this tool tell me if my result is normal?
No. It converts a number between two units and stops there, on purpose. Reference intervals differ between laboratories and methods, and a single value means little without the rest of your results and the person who ordered them.
Is the Uric Acid — mg/dL to µmol/L free?
Free, unlimited, and no email address required. You can use it a hundred times a day and nothing changes.
Is the Uric Acid — mg/dL to µmol/L safe to use with private information?
No. The Uric Acid — mg/dL to µmol/L runs entirely in your browser using JavaScript. Your input never reaches inputtesthub.com or any third party — open your browser's Network tab while you use it and you will see no request go out.
What problem does the Uric Acid — mg/dL to µmol/L solve?
The jobs it is built for: reading a uric acid result issued in mg/dL when you are used to µmol/L. Comparing an old report with a new one after moving country or changing laboratory. Following a study or a guideline written in the other unit system. It is built for exactly those cases rather than being a general-purpose tool with this bolted on.
When is the Uric Acid — mg/dL to µmol/L not the right tool?
This converts units. It does not interpret results, does not compare your value against a reference interval, and is not a substitute for the clinician who ordered the test — reference intervals differ between laboratories, methods and populations. Knowing where a tool stops being trustworthy matters more than the cases where it works.
Which values should I know?
This conversion is 1 mg/dL = 59.4845 µmol/L. Conventional unit is mg/dL — mg/dL in the US and much of Asia; µmol/L in the UK, Canada, Australia and Europe.. Factor is 1 mg/dL = 59.4845 µmol/L (divide by 0.0168111 to go back). These are printed on the page itself, so you do not have to take them on trust.
Can I rely on this for exact work?
The calculation runs in double precision and the result is shown to ten significant figures, so converting a value and converting it back returns the original. What is displayed is rounded for readability; what is copied is not.

Related converters tools

All 1079
01

Length Converter

Converts between 15 length and distance units instantly, showing the exact conversion factor…

02

Weight Converter

Converts between 21 weight and mass units instantly, showing the exact conversion factor and a…

03

Area Converter

Converts between 25 area units instantly, showing the exact conversion factor and a full…

04

Volume Converter

Converts between 21 volume and capacity units instantly, showing the exact conversion factor…

05

Speed Converter

Converts between 7 speed and velocity units instantly, showing the exact conversion factor and…

06

Time Converter

Converts between 11 time units instantly, showing the exact conversion factor and a full…

07

Digital Storage Converter

Converts between 11 digital storage units instantly, showing the exact conversion factor and a…

08

Pressure Converter

Converts between 10 pressure units instantly, showing the exact conversion factor and a full…

09

Energy Converter

Converts between 11 energy and work units instantly, showing the exact conversion factor and a…

10

Power Converter

Converts between 7 power units instantly, showing the exact conversion factor and a full…